![[ Back to EurekAlert! ]](http://www.eurekalert.org/images/back2e.gif){kind=small}
Public release date: 4-Feb-2013[ | E-mail |
Share ] Contact: Ruth Klinkhammer
ruth.klinkhammer@cmc-nce.ca
403-210-7879
Carbon Management Canada
Nano-sensors could improve accuracy of monitoring and measurement
TORONTO, FEBRUARY 4, 2013 -- Researchers at the Universities of Toronto and St. Francis Xavier are developing an affordable, energy efficient and ultra-sensitive nano-sensor that has the potential to detect even one molecule of carbon dioxide (CO2).
Current sensors used to detect CO2 at surface sites are either very expensive or they use a lot of energy. And they're not as accurate as they could be. Improving the accuracy of measuring and monitoring stored CO2 is seen as key to winning public acceptance of carbon capture and storage as a greenhouse gas mitigation method.
With funding from Carbon Management Canada (CMC), Dr. Harry Ruda of the Centre for Nanotechnology at the University of Toronto and Dr. David Risk of St. Francis Xavier are working on single nanowire transistors that should have unprecedented sensitivity for detecting CO2 emissions.
CMC, a national network that supports game-changing research to reduce CO2 emissions in the fossil energy industry as well as from other large stationary emitters, is providing Ruda and his team $350,000 over three years. The grant is part of CMC's third round of funding which saw the network award $3.75 million to Canadian researchers working on eight different projects.
The sensor technology needed to monitor and validate the amount of CO2 being emitted has not kept pace with the development of other technologies required for carbon capture and storage (CCS), says Ruda.
"This is especially true when it comes to surface monitoring verification and accounting (MVA)," he says. "Improving MVA is essential to meet the potential of carbon capture and storage."
And that's where the ultra-sensitive sensor comes in. "It's good for sounding the alarm but it's also good from a regulatory point of view because you want to able to tell people to keep things to a certain level and you need sensors to ensure accurate monitoring of industrial and subsurface environments," Ruda says.
The sensors could provide complete topographic and temporal mapping of carbon emissions, which would help in the design of new protocols for carbon storage and recovery systems as well provide the means for enforcing regulationsall of which will enable markedly reduced emissions. Risk's role will be in testing and translational work that will help embed the sensors in these real-world application environments.
"The way things behave at that nano scale is different than the traditional or micron scale," says Ruda. "We've been working in this area for nearly 20 years and we are among the leaders in developing the know-how for nano sensors."
Ruda says the project will initially prove the sensor is capable of detecting very small amounts of carbon, but eventually it could be used to detect other emissions in a variety of industries.
###
For information or interviews:
Ruth Klinkhammer, Communications Director
Carbon Management Canada
2500 University Drive NW
Calgary, AB, Canada, T2N 1N4
T: 403.210.7879
E: ruth.klinkhammer@cmc-nce.ca
W: www.cmc-nce.ca
About Carbon Management Canada
Carbon Management Canada (CMC) is a national network that funds research and promotes the transfer to practice of knowledge and technologies to reduce CO2 emissions in the fossil energy industry and other large stationary emitters. CMC has over 160 investigators, network agreements with 27 Canadian universities, and has invested $22 million in 44 research projects.
[ | E-mail | Share ] ?
AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert! system.
Public release date: 4-Feb-2013[ | E-mail |
Share ] Contact: Ruth Klinkhammer
ruth.klinkhammer@cmc-nce.ca
403-210-7879
Carbon Management Canada
Nano-sensors could improve accuracy of monitoring and measurement
TORONTO, FEBRUARY 4, 2013 -- Researchers at the Universities of Toronto and St. Francis Xavier are developing an affordable, energy efficient and ultra-sensitive nano-sensor that has the potential to detect even one molecule of carbon dioxide (CO2).
Current sensors used to detect CO2 at surface sites are either very expensive or they use a lot of energy. And they're not as accurate as they could be. Improving the accuracy of measuring and monitoring stored CO2 is seen as key to winning public acceptance of carbon capture and storage as a greenhouse gas mitigation method.
With funding from Carbon Management Canada (CMC), Dr. Harry Ruda of the Centre for Nanotechnology at the University of Toronto and Dr. David Risk of St. Francis Xavier are working on single nanowire transistors that should have unprecedented sensitivity for detecting CO2 emissions.
CMC, a national network that supports game-changing research to reduce CO2 emissions in the fossil energy industry as well as from other large stationary emitters, is providing Ruda and his team $350,000 over three years. The grant is part of CMC's third round of funding which saw the network award $3.75 million to Canadian researchers working on eight different projects.
The sensor technology needed to monitor and validate the amount of CO2 being emitted has not kept pace with the development of other technologies required for carbon capture and storage (CCS), says Ruda.
"This is especially true when it comes to surface monitoring verification and accounting (MVA)," he says. "Improving MVA is essential to meet the potential of carbon capture and storage."
And that's where the ultra-sensitive sensor comes in. "It's good for sounding the alarm but it's also good from a regulatory point of view because you want to able to tell people to keep things to a certain level and you need sensors to ensure accurate monitoring of industrial and subsurface environments," Ruda says.
The sensors could provide complete topographic and temporal mapping of carbon emissions, which would help in the design of new protocols for carbon storage and recovery systems as well provide the means for enforcing regulationsall of which will enable markedly reduced emissions. Risk's role will be in testing and translational work that will help embed the sensors in these real-world application environments.
"The way things behave at that nano scale is different than the traditional or micron scale," says Ruda. "We've been working in this area for nearly 20 years and we are among the leaders in developing the know-how for nano sensors."
Ruda says the project will initially prove the sensor is capable of detecting very small amounts of carbon, but eventually it could be used to detect other emissions in a variety of industries.
###
For information or interviews:
Ruth Klinkhammer, Communications Director
Carbon Management Canada
2500 University Drive NW
Calgary, AB, Canada, T2N 1N4
T: 403.210.7879
E: ruth.klinkhammer@cmc-nce.ca
W: www.cmc-nce.ca
About Carbon Management Canada
Carbon Management Canada (CMC) is a national network that funds research and promotes the transfer to practice of knowledge and technologies to reduce CO2 emissions in the fossil energy industry and other large stationary emitters. CMC has over 160 investigators, network agreements with 27 Canadian universities, and has invested $22 million in 44 research projects.
[ | E-mail | Share ] ?
AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert! system.
Source: http://www.eurekalert.org/pub_releases/2013-02/cmc-asa020113.php
2014 Corvette Stacie Halas justin timberlake Corvette Stingray Claire Danes quentin tarantino jessica chastain
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.